Brass Direct Acting Solenoid Valve 2/2 Way
These solenoid valves with brass bodies and NBR diaphragm. These valves have threaded BSP female ports. These valves are direct acting, no need for any back pressure to operate, and are available normally open or normally closed (position with no power). For pressure rating see next tab (Pressure). Working temperature of 0°C to 80°C.
Other seals (EPDM or FPM) available on request.
The differential pressure are:
- 1/4" to 1/2" AC 0-20 bar DC 0-16 bar
- 3/4" to 2" AC 0-10 bar DC 0-6 bar (Light Oil <20CST AC 0-7 bar DC 0-4 bar)
1/4" to 1/2"
230 VAC is 22VA
24 VDC is 13W
3/4" to 1"
230 VAC is 33VA
24 VDC is 20W
1.1/4" to 2"
230 VAC is 70VA
24 VDC is 40W
Face to Face
- 1/4" (DN8) 50mm
- 3/8" (DN10) 50mm
- 1/2" (DN15) 50mm
- 3/4" (DN20) 73mm
- 1" (DN25) 99mm
- 1.1/4" (DN32) 112mm
- 1.1/2" (DN40) 123mm
- 2" (DN50) 168mm
It is recommended the these valves are installed with the coil upright, and we also recommend that you install a Y type strainer before the solenoid to prevent any blockages in the valve.
Needed this valve to allow a small volume of water through at very low pressure in a short period of time. It does the job extremely well. Good robust construction.
Great company to deal with to source my exact needs. Prompt service.
We Also Recommend
DZR Brass Ball Valve WRAS Approved Compression Ends
Galvanised Malleable Iron Equal Hexagon Nipple Male x Male
Wafer Pattern Butterfly Valve WRAS Approved
Galvanised Malleable Iron Reducing Bush Male x Female
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.